Printer (gb.form.print)

This class allows to print documents on printers, or save them in a file.

A3	Paper size of 297 × 420 mm.
A4	Paper size of 210 × 297 mm, 8.26 × 11.69 inches.
A5	Paper size of 148 × 210 mm.
B5	Paper size of 182 × 257 mm, 7.17 × 10.13 inches.
Custom	Custom paper size.
Executive	Paper size of 7.5 × 10 inches, 191 × 254 mm.
Horizontal	Both sides of each sheet of paper are used for printing. The paper is turned over its horizontal edge.
Landscape	The page's width is greater than its height.
Legal	Paper size of 8.5 × 14 inches, 216 × 356 mm.
Letter	Paper size of 8.5 × 11 inches, 216 × 279 mm.
Portrait	The page's height is greater than its width.
Simplex
Vertical	Both sides of each sheet of paper are used for printing. The paper is turned over its vertical edge.

Default	Return the name of the default printer.
List	Return the list of printers.

Свойства

MarginBottom	Return or set the default bottom margin in millimeters.
MarginLeft	Return or set the default left margin in millimeters.
MarginRight	Return or set the default right margin in millimeters.
MarginTop	Return or set the default top margin in millimeters.

CollateCopies	Return or set if multiple copies are collated or not.
CopyCount	Return or set the number of copies that will be printed.
Count	Return or define the number of pages in the printed document.
Duplex	Return or set the printing duplex mode.
FirstPage	Return or set the first page that must be printed.
FullPage	Return or set if drawing page will be done inside the margins (FullPage is FALSE), or on the entire page (FullPage is TRUE).
GrayScale	Return or set if printing is done by using gray scale, or full colors.
LastPage	Return or set the last page that must be printed.
Name	Return or set the printer name.
NumCopies	Return or set the number of copies that will be printed.
Orientation	Return or set the printing orientation.
OutputFile	Return or set the path of the PDF or PostScript output file.
Page	Return the current page that must be printed.
Paper	Return or set the kind of paper used for printing.
PaperHeight	Return or set the custom paper height in millimeters.
PaperWidth	Return or set the custom paper width in millimeters.
Resolution	Return or set the printer resolution, in DPI (Dots Per Inches).
ReverseOrder	Return or set if the document pages will be printed in reverse order.

Методы

Preview

Open the print preview as a modal form.

Cancel	Abort the current printing job.
Configure	Open the printer configuration dialog.
Print	Run the printing process.

Begin	This event is raised when the print starts.
Draw	This event is raised for each page that must be printed.
End	This event is raised when the print is finished.
Paginate	This event is raised so that you can paginate your document in the background.